ADAS Aftermarket
Präzision ADAS systems for the evolving vehicle ecosystem
End-of-line OEM accuracy, now accessible in the aftermarket for rapid, scalable deployment.
vehicles calibrated
of vehicles covered
Jahre Innovation
Confident Calibrations
Calibration confidence, no matter the vehicle platform.
For decades, Burke Porter has delivered advanced validation and test systems for complex vehicle technologies. Today, our ADAS calibration solutions ensure safety-critical systems—from radar to camera to lidar—are aligned to OEM precision across ICE, hybrid, and EV platforms. Whether you're servicing passenger cars, fleets, or commercial vehicles, our tools and support span the full calibration lifecycle, from repair to verification.
Extensive vehicle coverage, backed by OEM alignment.
Our ADAS platforms support over 96% of model vehicles equipped with advanced safety systems—including domestic, European, and Asian brands. Whether calibrating radar, camera, lidar, or lidar sensors, our solutions are engineered to meet OEM specifications across ICE, hybrid, and EV platforms—ensuring reliable results, regardless of make or model.
ADAS calibration without
the capital expense
Calibration-as-Service | CaaS™
Ascential Technologies is expanding access to OEM-trusted ADAS calibration through a new subscription-based model from its Burke Porter brand. Instead of committing to a significant upfront investment, collision repair centers and calibration providers can now access industry-leading calibration equipment through a predictable monthly subscription.
This Calibration-as-a-Service™ model allows partners to bring calibration in-house using the same equipment trusted by OEMs, while avoiding the capital expenditure typically required to own and maintain these systems. A nominal per-use fee applies only when calibrations are performed, helping align costs directly with revenue and usage.
OEM Trusted Equipment
Target Positioning System (TPS)
Our TPS platform is the industry’s most advanced solution for ADAS calibration—engineered from decades of Burke Porter OEM expertise. It automates target positioning, improves precision, and eliminates technician error with minimal setup.
- Camera box & image plane alignment
- Portable radar-absorbing wall calibration
- Target hanger with RFID verification
- Front wheel clamp & aperture plate positioning
- 360° calibration mat for surround-view systems
- Azimuth system check target
- Rear wheel clamp and laser block for axle alignment
Camera Box & Image Plane
Camera Box & Image Plane
Portable Radar -Absorbing Wall
Calibration Target Hanger & RFID Reader
Front Wheel Clamp & Aperture Plate
Longitudinal Linear Rail
Automated vehicle centering
OEM Targets
The Super Center
The Burke Porter Super Center is the world’s fastest and most precise ADAS calibration platform—purpose-built for high-throughput shops. It fully automates vehicle centering and target alignment, delivering OE-grade results with minimal technician input.
- Longitudinal linear rail for precision-guided movement
- Automated vehicle centering for perfect sensor alignment
- OEM-approved targets with digital positioning
- Tablet interface for full system control and calibration documentation
ADAS Calibration Equipment Vergleich
Built for precision. Proven in performance. Measured against the rest.
| Key Metric | Ascential Super Center | Ascential TPS | Competitor A | Competitor B |
|---|---|---|---|---|
| Total calibration cycle* | 5 min 47 sec | 14 min 14 sec | 19 min 44 sec | 18 min 44 sec |
| Speed advantage | ≈ 70% faster | ≈ 28% faster | – | – |
| Rig movement after parking | None, park-once workflow | None, park-once workflow | Must move rig twice | Must move rig twice |
| Target positioning | Auto X-Y-Z (vertical, horizontal, distance) | Auto X-Y-Z (vertical, horizontal, limited distance) | Handbuch | Handbuch |
| Automated wheel clamping | Ja | Nein | Nein | Nein |
| Scan-tool compatibility | Open / agnostic | Open / agnostic | Open / agnostic | Proprietary |
| Calibration report detail | Photo-validated vehicle and target positions | Photo-validated vehicle and target positions | Pass/fail plus limited geometry | Minimal detail |
| Target Selection Verification | Ja | Ja | Nein | Nein |
| Required floor space | Larger | Medium | Medium | Medium |
* Total calibration cycle includes front radar and camera
ADAS Verification
Verification assurance,
before the keys change hands.
For decades, Burke Porter has set the standard in vehicle validation for global OEMs. Our ADAS verification solutions now empower fleets, remarketers, auction platforms, and government agencies to inspect safety-critical systems—like radar, camera, and sensor fusion—with precision and speed. Whether before resale, redeployment, or compliance review, our tools provide data-backed confidence that every advanced safety feature is ready for the road.
Our ADAS Verification suite delivers comprehensive, OEM-grade system validation—perfect for vehicle inspection, fleet readiness, and pre-sale safety confirmation. Fast, automated, and built for scale.
- Vehicle-in-the-loop simulation using Radar Target Simulator (RTS) Scene Emulator to replicate real-world traffic conditions
- Fusion-ready software to validate integrated system behavior
- Radar frequency sweep and EIRP analysis
- Bore axis alignment and signal strength verification
- Adaptive Cruise Control functionality check
- Euro-NCAP AEB and collision avoidance protocols
- Lane Departure Warning (LDW) and Lane Keep Assist (LKA) testing
- Full-factory DVT suite including transmission and brake validation
Software
Innovation driven by in-house software expertise.
At Burke Porter, our ADAS solutions are powered by proprietary software platforms developed entirely in-house. From calibration automation to advanced verification, our tools are purpose-built for real-world performance—optimized for accuracy, speed, and technician usability. This deep integration allows us to move faster, adapt quicker, and deliver smarter systems across calibration, validation, and diagnostic workflows.
Lebenszyklus-Support
Erweitertes Service-Angebot mit vernetzten Produkten und überlegenem Service
Your expert source
for ADAS intel
Burke Porter steht an der Spitze der weit verbreiteten Einführung von ADAS-Systemen. Wir verfügen über jahrzehntelange End-of-Line-OEM-Erfahrung und nutzen diese Expertise, um branchenführende, durchgängige ADAS-Kalibrierungslösungen und -dienstleistungen bereitzustellen.
Erkunden Sie Erkenntnisse unseres Teams zertifizierter Techniker und Experten, die ihr umfassendes Wissen über ADAS-Kalibrierungen teilen und einige der drängendsten Fragen der Branche beantworten.
Calibration Intelligence Starts at the Estimate
Identifying what needs calibration before the repair begins.
Our Estimating Services ensure ADAS calibrations are correctly identified from the start of the repair planning process. Using a combination of expert review and Al-driven analysis, we evaluate body shop estimates to flag when and where calibration is required, based on OEM procedures, sensor locations, and repair operations. This intelligent, proactive approach reduces supplement delays, ensures compliance, and protects both vehicle safety and shop profitability.
The service can be delivered as a standalone solution or seamlessly integrated as part of our full ADAS calibration platform.
Every calibration is managed on-site with equipment we operate directly to deliver on the following:
Operational Efficiency
- Streamlines ADAS calibration and testing
- Reduces setup time and technician training
- Eliminates redundancy across calibration tools
- Consolidates multiple procedures into one
Cost & Quality Control
- Cuts waste through accurate calibrations
- Minimizes rework and sensor-related comebacks
- Lower operational costs with one partner
- Reduces integration and tool compatibility issues
Risk Mitigation & Reliability
- Prevents failures through digital validation
- Increases confidence in system readiness
- Meets OEM procedures and safety standards
- Delivers traceable reports for insurance
Warum us
Ascential’s ADAS aftermarket division delivers OEM-level end-of-line calibration, testing, and verification technologies to the dynamic aftermarket—powered by advanced software intelligence and precision-engineered platforms.
Our solutions harness real-time data capture, AI-enhanced diagnostics, and modular system integration to elevate calibration workflows. This synergy of engineering excellence and technician-first usability empowers repair shops with dependable, future-ready systems for today’s and tomorrow’s safety-critical vehicles.
Why ADAS systems from Burke Porter?
Operational Efficiency
- Streamlines ADAS calibration and testing
- Reduces setup time and technician training
- Eliminates redundancy across calibration tools
- Consolidates multiple procedures into one
Cost & Quality Control
- Cuts waste through accurate, first-time-right calibration
- Minimizes costly rework and sensor-related comebacks
- Lowers procurement and support costs with one partner
- Reduces integration overhead and tool compatibility issues
Risk Mitigation & Reliability
- Prevents failures through digital validation & automation
- Increases confidence in system readiness post-repair
- Ensures alignment with OE procedures and safety standards
- Delivers traceable reports for insurance and compliance
Lebenszyklusunterstützung, die Sicherheit bietet
Ascential Care bringt unsere Top-Techniker aus verschiedenen Disziplinen aus der ganzen Welt zusammen, um unsere globalen Kunden zu unterstützen. Unsere Kundenservice-Plattform gewährleistet Nähe und Reaktionsfähigkeit und ermöglicht es uns, uns schnell an sich ständig ändernde Anforderungen anzupassen. Mit Ascential Care können Kunden auf jeder Stufe hervorragenden Vor-Ort- und Fern-Support erwarten.
Support-Beispiele
- Prüfstand-Abschaltung, schnelle Reaktion
- Geplante Wartungsprüfungen
- Schmierung und Filterwechsel
- Notfallreparaturen
- Ersatzteile
- Lebenszyklusverwaltung
- Kalibrierung
- Festpreisvertrag
- Technische Mitteilungen und Service-Bulletins
- Verwaltung der mittleren Betriebsdauer zwischen Ausfällen (MTBF)
- Frühe und prädiktive Verschleißerkennung
- Optimale Wartungsplanung und operative Finanzprognosen
- Digitale Wartungsverwaltung im Logbuch
- Verwaltung veralteter Komponenten
