Ascential (formerly Titan) Section Valve Test system for fluid power valves applications. Sectional valves consist of multiple sections assembled together to form a stack to be used in mobile applications. A typical stack consists of 2 to 10 sections with each section being selected for a specific function. Sections consist of a directional control spool with or without a float position, proportionally actuated mechanically, hydraulically, or electrically. Sections may include workport reliefs, PO checks, pre or post pressure comp and flow limiters. Sections may utilize a load sense feature for pump control or be of an open center design for use with positive displacement pumps. Ascential (formerly Titan) has taken two approaches to test sectional valves. In one approach, the section is tested alone and then a very simple test is performed on the complete stack. A second approach is to perform section level testing after assembled into the stack.
Sectional valves consist of multiple sections assembled together to form a stack to be used in mobile applications.
分片阀由多个阀片组装成阀组,用于移动设备领域。典型阀组由 2 至 10 个阀片组成,每个阀片根据特定功能选配。阀片包含方向控制阀芯,可带或不带浮动位,并可通过机械、液压或电气方式进行比例驱动。阀片可包括工作油口溢流阀、PO 单向阀、压力补偿器(前置或后置)和流量限制器。阀片可采用负载敏感功能用于泵控制,也可采用开中心设计,配合定量泵使用。
Ascential (formerly Titan) has taken two approaches to test sectional valves. In one approach, the section is tested alone and then a very simple test is performed on the complete stack. A second approach is to perform section level testing after assembled into the stack. The approach is usually governed by the customer, although Ascential (formerly Titan) can discuss the pros and cons of each.
10–350 BAR
0–350 LPM
Ascential T&M 分段阀测试系统专为流体传动阀类应用而设计。分段阀由多个阀片装配在一起,构成用于移动设备领域的阀组,典型阀组包含 2 至 10 个阀片,每个阀片各自承担特定功能。